Cannabis Hemp Marijuana Skunk Weed Pot Iron On / Sew On Highly Detailed Clothes Badge Patch Motif Black Green

Step 1 Wash the garment intended for the patch and dry it on the permanent press cycle to aid in obtaining a wrinkle-free garment. If the clothing is not smooth, the patch may not adhere correctly

r might bunch up the material when applied. Step 2 Lay the clothing flat on an ironing board and centre the patch over the hole in the clothing. Place a washcloth over the patch so the heat is not applied directly to the patch or clothing when ironing. Step 3 Set the iron to the heat setting to match the material in the garment. Allow the iron adequate time to heat up. If you start to apply the patch before the iron is fully heated, it may not adhere correctly in places. Step 4 Place the iron on the washcloth and move it slowly in a circular motion for approximately 90 seconds. If the iron starts to wrinkle the cloth, straighten it back out. Step 5 Lift the cloth to check that the patch is applying correctly, then replace the cloth back over it. If the patch is not adhering, you will want to stop the process and start over with a new patch. Iron the cloth for another 30 seconds, turn off the iron and unplug it. Step 6 Remove the washcloth and let the clothing sit until it and the patch are cool to the touch.